NCast Telepresenter M4 - Manual (Page 36)

NCast Telepresenter Reference Manual
When all fields are filled, click on the “Update” button.
3.9.15.Viewing Scheduler Activity
The Logs page (See Section 3.11) permits viewing the scheduler activity logs for possible error messages,
reports on scheduled events and other actions. The Serial log contains information on serial command
activity.
3.9.16.External Scheduler Program
There is an external utility program available (in the Python programming language) which may be used to
schedule multiple Telepresenters from a single, central location. Check the download area of the NCast
website for this utility.
3.10. N
OTIFICATIONS
The Telepresenter has an extensive system of notifications by e-mail for routine and extraordinary events
during its operation. Events can be informational, like “Archive uploaded”, or they can be error reports such
as “Disk full”.
Event are categorized by their severity level (Info, Warning, Error and Critical), and by their specific action or
type (e.g. Session start, Recording start, etc.). Events can be system-wide (e-mails are sent to the system
administrator) or Channel specific (a subset of events is associated with a single Channel and sent to an e-
mail address associated with that Channel).
System-wide events are configured in the Configuration → Notifications → Select Events Menu, and
Channel related events are configured in the Channel → Modify → Notifications → Select Events Menu (see
Section 4.8.). The rules controlling event reporting are the same in both cases, except for the system or
Channel orientation of the activity.
In summary, there is a comprehensive e-mail notification system in place to inform the administrator that
“The disk is full!” or the Channel owner that “Your recording is ready” and many other notices.
3.10.1.Notifications
NCast Corporation Revision 2.2
Page 36