Introduction, Purpose, Document overview – NCast Telepresenter M4 User Manual

Page 6: Terms and definitions

Advertising
background image

NCast Telepresenter Reference Manual

1. Introduction

1.1. P

URPOSE

The NCast Telepresenter Reference Manual is intended for the Audio/Video or Network engineer who will be
tasked with the job of installing and setting up a Telepresenter or a system of multiple Telepresenters. The
Quick Start Manual should be consulted for basic setup, power-on of a unit and troubleshooting. This guide
is designed to cover topics in greater depth and to assist in optimizing the performance of a Telepresenter.

1.2. D

OCUMENT

O

VERVIEW

This document is divided into two major sections: the theory of operation and a discussion of parameter
settings.

1.3. T

ERMS

AND

D

EFINITIONS

A complete discussion of MPEG compression, Internet streaming, webcasting protocols and related topics is
beyond the scope of this document. Other sources cover this material in great detail. The following are brief
definitions of some of the terms used throughout this manual.

AAC – Advanced Audio Coding, a wideband audio encoding and compression algorithm.

Auto-detect – A capability to automatically sense if an input signal (graphics or video) is
present and to lock onto that signal without further manual intervention.

CIF - Describes an image or display surface with a resolution of 352x288 pixels.

DVI – Digital Visual Interface, a digital interface standard which provides for connection to
LCD panels and displays.

H.264 – A compression format that delivers very high quality video at low bit rates. MPEG-4
Part 10 utilizes the H.264 codec for transmission.

IETF – Internet Engineering Task Force, the standards body for Internet protocols.

ISO – International Standards Organization

Latency – The end-to-end time delay between a change in the source image and the
corresponding change in the remotely displayed image.

Line-Level – Sound level signals typically in the range of –10 dBu to +30 dBu.

Lip-sync – The synchronization of independent audio and video streams at a receiving
decoder so that the presentation is in the same time relationship as the source.

Mic-Level – Sound level signals typically in the range of –70 dBu to –30 dBu.

MPEG Compression – MPEG is an acronym for Motion Picture Experts Group, an industry-
wide committee which has defined a series of standards for the compression of audio and
video source material.

MTU – The maximum transmission unit is the maximum number of bytes permitted in a
transmitted packet.

Multicast – A family of computer transmission protocols where multiple receivers access a
single transmitted packet stream.

NCCP – NCast Conference Control Protocol provides coordination, control and identification
of participants in a multi-way collaborative conference session.

N-Way – An NCast proprietary service for multicast bridging and webcasting.

NCast Corporation

Revision 2.2

Page 6

Advertising
This manual is related to the following products: