Niveo Professional NWAR33P - Manual (Page 130)

130
One-to-One NAT
One-to-One NAT has the function that maps valid external addresses to internal addresses
hidden by NAT. Machines with an internal address could be accessed at the corresponding
external valid IP address.
WAN IP Pool
: Click “Enable” to activate the function. Then, click “Apply”.
Wan Port: 3 Modes could be selected: ADSL, and EWAN.
IP Address: Enter WAN Port IP Address and c
lick “Add”. If you want to edit/delete the IP
Address,
Click the Edit/Delete. Click “Edit/Delete button to make a change.
And then, Click “One-to-one NAT Table” to process to the next step. Select the Public IP
Address and the designated private IP Address that you attempt to convert to the public IP.