Niveo Professional NWAR33P - Manual (Page 38)

38
Step 1: Select WAN port connect mode from the connect mode drop down menu. There are two
types of connect mode to choose from: ADSL or EWAN. Here select ADSL and click Continue.
If you only want to configure Wireless, press Jump to Wireless setting.
Step 2: When ADSL line is not ready, the screen1 below will appear to remind you. Then you
should connect the ADSL line. While ADSL line is ready, the screen 2 below will appear to let
you go on. Here you can select Auto or Manually. Select Auto will go to step 3, and select
Manually will go to step 4.
Screen1
Screen 2
Step3: Wait while the DSL is scanning, when the scanning is OK, the scanning result will
appear,see screen 3, and then it will quickly goes to step 4. Or you can Abort to manually
setting to step 4.