Niveo Professional NWAR33P - Manual (Page 60)

60
Fixed IP Address (EWAN)
IP Address: Enter your fixed IP address.
Netmask: User can change it to others such as 255.255.255.128. Type the netmask assigned
to you by your ISP (if given).
Gateway: Enter the IP address of the default gateway.
Obtain DNS automatically: Click to activate DNS and to enable the system to automatically
detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
VLAN Mux: check whether to enable VLAN Mux function.
802.1Q VLAN ID: It is a parameter to specify the VLAN which the frame belongs. Enter the
VLAN ID identification, tagged: 2-4095.
IPv6: Check to enble the function.
IP/Prefix Length: Enter IP Address and Prefix length.
IPv6 Gateway: Enter the IP address of the default IPv6 gateway.
Obtain IPv6 DNS: Click to activate DNS and to enable the system to automatically detect DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the netmask.
Click Apply to confirm the settings.