ONICON System-30 MODBUS BTU - Manual (Page 41)

THERMOWELL INST
ALLA
TION
IN WELDED PIPE
W
eld in accordance
with piping system
specifications.
If piping specifications permit,
drill 5/8” hole through pipe
1/4” NPT
welded
branch outlet
DO NOT OVER-TIGHTEN THERMOWELL.
Thermowell has a thin wall for better temperature
measurement and can be damaged by over-tightening.
ONICON
Thermowell
Apply thin coating of
thermally conductive grease
before assembling.
ONICON
T
emperature
Sensor
Retainer Cap
1500 North Belcher Road, Clearwater
, FL
33765 • T
el (727) 447-6140 • Fax (727) 442-5699 • [email protected]
3-1-99
0084-2050
1
1451
South
Belcher Road, Largo, FL
33773
• T
el (727) 447-6140
• Fax (727) 442-5699
• [email protected]
System-30 BTU Measurement System MODBUS R
TU RS485 04/14 - 0583-1 / 18345
A
-
2