OpenEye OE4 - Manual (Page 13)

29060AB 1
PREFACE
ABOUT THIS GUIDE
This manual is a setup and maintenance guide that can be used for reference when setting up the X r -Series HVR and for
troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit.
OpenEye reserves the right to make changes to the products represented by this manual without notice.
The following text and symbols mark special messages throughout this guide:
Note Text set off in this manner indicates topics of interests that can help the user understand the product better.
Tip Text set off in this manner indicates topics and points of interests that can be helpful when using or settings up the HVR.
TECHNICIAN NOTES
Warning Only authorized technicians trained by OpenEye should attempt to repair this HVR. All troubleshooting and repair procedures
that may be shown are for reference and minor repair only. Because of the complexity of the individual components and
subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring
board. Improper repairs can create a safety hazard. And any indications of component replacement or printed wiring board
modifications may void any warranty
Warning To reduce the risk of electrical shock or damage to the equipment:
•
Do not disable the power grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
• Disconnect the power from the computer by unplugging the power cord either from the electrical outlet or the computer.
Caution To properly ventilate your system, you must provide at least 3 inches (7.6 cm) of clearance at the front and back of the HVR.