OpenEye OE4 - Manual (Page 16)

4
FEATURES
OpenEye’s HVRs include the following new features:
• Optimized and Designed for Microsoft ® Windows XP Embedded
• Record up to 480 IPS
• Up to 32 Camera Inputs
• Supports up to 32 Network Cameras
• Supports up to 16 Relay Outputs on Alarm Activation
• Supports up to 16 Sensor Inputs for Alarm Control
• Remote System Operation & Configuration
• Supports Multiple Simultaneous Remote Connections
• PAN / TILT / ZOOM Controls
• Simultaneous Video Search, Playback and Backup
• Video Indexes for Easy Searching
• Multiple Levels of Security Access
• Up to 32 Looping Outputs
• Up to 4 Composite Outputs
• Up to 16 Audio Inputs
• High Performance, Durable, Rackmount Case
• Output the Video to a NTSC/PAL Display
• Up to 10TB Internal Storage
• Digital Signature Support
• Continuous, Motion Detection, Alarm, Pre-Alarm, and Scheduled Recording Modes
• Hardware Watchdog
• 720x480 / 720x240 / 360x240 NTSC
720x576 / 720x288 / 360x288 PAL
PRODUCT MODELS
OpenEye X
r
-Series HVRs are available as Real-Time units.
OpenEye X-Series HVRs are available as Real-Time and Non-Real Time display units.
Real-Time Units are systems with 120R, 240 and 480 IPS recording capabilities. Users can adjust the recording resolution of real-
time units independently for each camera. The spot monitor output of real-time units mirrors the display on the Live Screen of the
HVR. The live view of all real-time units is 30 IPS at 720x480 resolutions for all cameras.
Non-Real-Time Units are systems with 120/60 IPS recording capabilities. The recording resolution is not independent for individual
cameras and instead applies to all cameras. The spot monitor output of non-real-time units displays a looping video feed of selected
camera channels with no support for a multiplexed display. The live view of all non-real-time units is based off the global resolution
settings and IPS recording settings for each camera. A camera set to record at 3IPS will display 3IPS in the live view.