OpenEye OE4 - Manual (Page 38)

26
TURNING ON THE HVR
1. Turn on the monitor and any external peripherals (ex. Printers, External Storage Devices, etc.) connected to the HVR.
2. Press the Power Switch located on the front of the HVR.
3. The HVR will run a series of self-tests. After two or three minutes, a series of messages may be displayed as the various
hardware and software subsystems are activated. Under normal circumstances, users should not be asked to respond to these
messages. If asked to respond to the messages (adding a Printer, Monitor, etc for the first time) follow the instructions carefully.
4. Startup is complete when the OpenEye HVR software is finished loading and displays the main menu screen.
TURNING OFF THE HVR
1. Click the Exit Button on the main menu screen of the HVR software.
2. Select Power Off from the drop down menu, which appears in the Power Off prompt, and click OK.
The HVR may take several minutes to shut down completely.
Caution Always be sure to follow the proper procedures when turning off the power to the HVR. NEVER disconnect the power to the
HVR while it is still running or in the process of shutting down. Doing so can cause data loss, file corruption, system
instability and hardware failure.