OpenEye CM-816 - Manual (Page 25)

26
OpenEye Network Camera Manager is a software tool that allows you to quickly and
easily connect and configure your OpenEye IP Cameras. This software allows you to
assign IP addresses, manage users, configure video settings, and update firmware on
multiple cameras at once.
The Network Camera Manager software is pre-installed on all OpenEye Recorders, and
included on the software CD with all OpenEye IP cameras. It is also available for
download on the OpenEye website.
Installation
You can install Network Camera Manager on any personal computer (PC) or laptop
using the software CD included with your OpenEye IP camera or by downloading the
program from openeye.net.
Network Camera Manager will only work on PCs or laptops that use a
Windows operating system. It is compatible with Windows XP, Vista, 7, and 8.
Starting Network Camera Manager
After installing the program on your PC or laptop, open the program to begin configuring
your cameras.
To access Network Camera Manager on an OpenEye recorder, you must operate the
recorder in Windows Mode.
1. In the Live Screen, click Exit .
2. Click Restart in Windows Mode .
3. Click OK .
4. Double-click Network Camera Manager.