OpenEye CM-816 - Manual (Page 3)

4
Important Safeguards
1. Read Instructions
Read all of the safety and operating instructions before using the product.
2. Retain Instructions
Save these instructions for future reference.
3. Attachments / Accessories
Do not use attachments or accessories unless recommended by the
appliance manufacturer as they may cause hazards, damage product and
void warranty.
4. Installation
Do not place or mount this product in or on an unstable or improperly
supported location. Improperly installed product may fall, causing serious
injury to a child or adult, and damage to the product. Use only with a
mounting device recommended by the manufacturer, or sold with the
product. To insure proper mounting, follow the manufacturer's instructions
and use only mounting accessories recommended by manufacturer.
5. Power source
This product should be operated only from the type of power source
indicated on the marking label.
Precautions
Operating

Before using, make sure power supply and other cables are properly connected.

While operating, if any abnormal condition or malfunction is observed, stop
using the camera immediately and then contact your local dealer.
Handling

Do not disassemble or tamper with parts inside the camera.

Do not drop or subject the camera to shock and vibration as this can damage
camera.

Do not block the cooling holes on the bracket. This camera has a cooling fan
inside the housing. Blocking the cooling holes will cause heat to build up and
cause malfunction.

Care must be taken when you clean the clear dome cover. Scratches and dust
will ruin the image quality of your camera. Do not use strong or abrasive
detergents when cleaning the camera body. Use a dry cloth to clean the
camera when it is dirty. In case the dirt is hard to remove, use a mild detergent
and wipe the camera gently.