OpenEye CM-816 - Manual (Page 38)

30875AF 39
Motion Detection
Use the Motion Detection menu to configure the
motion detection window(s). Here, Motion
Detection can be turned On or Off, and other
general settings can be specified.
To enable motion detection:
1. Use the Motion Detection dropdown to
select a motion detection preset (1-4). If
choosing an additional preset after 1,
check the
On checkbox.
A motion detection preset can be
turned
Off at a later time.
2. If desired, check the By Schedule check box and use the dropdown menu to
select a schedule.
3. Designate the Motion Detection Setting values.
4. Check the appropriate boxes to designate the Trigger Action .
5. Click Save .
1. Use the Motion Detection dropdown to select a motion detection preset.
2. Click Add .
The selected motion detection square will be red.
3. Arrange and size the motion detection window as desired.
4. Click Save .
1. Click to select the desired motion detection window.
2. Click Delete .