6 taking a relative measurement – OWON HDS Series User Manual

Page 42

Advertising
background image

OWON HDS Series Handheld DSO & DMM 7-Using the Multimeter

figure 31: Freezing the Readings

7.6 Taking a Relative Measurement

A currently measured result relative to the defined reference value is displayed in a relative
measurement.
The following example shows how to take a relative measurement. At first, it is required to
acquire a reference value.

1. Press R key and R is displayed on the top side of the screen.

2. Press the AUTO SET key till C appears at the top of the screen.

3.

Plug capacitance extended module in capacitance measure jack.

4. When the reading leveling off, press F2 key and △ is displayed on the top side of the screen.

The saved reference value is displayed below △.

5. Plug capacitance, the displayed major reading on the screen is actual the capacitance value.

Look at the display, you can see a screen that looks like the following figure 32.

figure 32: Relative Measurement

34

Advertising
This manual is related to the following products: