Super Systems DPL4000 - Manual (Page 6)

Page #6 of 16___________________________________________________________________________ M4581 – DPL4000
Turning on the Device
1. Connect the Sensor Assembly to either one of the base
connectors in the indicator.
2. Press the Power On/Off button.
3. If desired, adjust the environmental settings in the instrument.
Pressure (P) - Preset to Atmospheric Pressure at time of manufacture
Specific Gravity (G) – Preset for Nitrogen
NOTE: For most applications, the default values for each of these
settings will be appropriate. The variations in Atmospheric
Pressure will have negligible impact on the resulting dew point.
The Specific Gravity is not used in the calculation of dew point.
It is only used in the determination of ppm/ppb (parts per
million/billion of water). If only dew point is displayed, the
Specific Gravity value can be ignored.
Menus
The settings can be changed and functions can be selected in the
menus. Follow the instructions below:
1. Open the main menu by pressing one of the buttons.
2. Press Open within 5 seconds. Otherwise, the basic display
returns. If this happens, start from step 1 again.
3. Move in the menus using the buttons.
4. Select an item with the button.
5. To return to the previous level, press .
6. To return to normal operation, press Exit.
Display Menu
Quantities and Units
You can select between 1 and 3 quantities to display at one time. The
options are: