Teo 8610 ISDN Phone Installation - Manual (Page 26)

Tone Commander 8610/8620 Installation Instructions
Page 26 13-280116 Rev. C
Terminal Mode (National ISDN only) ______________________________
If the network does not support Parameter Download, you must manually select the terminal mode.
From the Installation Options menu, select MODE.
(
SETUP
→ INSTL →
MORE 4 → MODE)
Select the terminal mode based upon the type of service that was ordered from your network
service provider.
CACH – CACH EKTS (default).
BASIC – Voice or Basic EKTS.
MERID1 – Nortel Meridian 1 Option Series PBX.
In most cases, your phone service should be configured for CACH EKTS.
Press the DONE key to return to the Installation Options menu or press the SETUP key to exit
Setup Mode.
TERMINAL MODE=CACH EKTS
CACH BASIC MERID1