Teo 8610 ISDN Phone Installation - Manual (Page 8)

Tone Commander 8610/8620 Installation Instructions
Page 8 13-280116 Rev. C
8) Multifunction Keys – select call appearances, activate network features, or dial personal speed dial
numbers. Red and green indicators on the keys show call appearance and feature status. The optional
8030X Button Expansion Module provides 30 additional multifunction keys.
Call Appearance State Indication
Idle OFF
Call Ringing Green – flashing
In Use by You Green – on steady
On Hold by You Green – winking
In Use at Another Terminal
or an Activated Feature
Red – on steady
On Hold at Another Terminal Red – winking
9) Volume Keys – adjust the receiver/speaker volume when on a call; adjust the ringer volume when on-
hook.
10) MUTE Key – mutes the microphone when using the speakerphone or handset/headset. A red indicator
on the key is lit when mute is active.
11) SPKR (Speaker) Key – activates the speakerphone. A green indicator on the key is lit when the
speakerphone is in use.
12) Dial Pad – dials telephone numbers, and sends DTMF tones to external equipment such as voice mail
systems. The dial pad is also used for number entry during setup.
13) TRAN (Transfer) Key – places the current call on hold, and selects an idle call appearance for
transferring the call. A second press completes a transfer.
14) CONF (Conference) Key – adds other parties to a conference call.
15) DROP Key – removes the last party added to a conference call, or disconnects you from a call and
returns new dial tone when not in conference mode.
16) HOLD Key – places a call on hold.
17) Microphone – used for hands-free (speakerphone) calling; located in front of the Hold key on the
bottom of the telephone.
18) Handset/Headset Jack – a jack on the side of the telephone connects to the handset or a standard
headset.
19) Telephone Identification Label Area – indented area for a directory number label. Use ½” x 1¾”
adhesive labels (Avery 8167 / 5267 or equivalent).