Watson-Marlow FF30 V2 - Manual (Page 11)

INSTRUCTION HANDBOOK
FF30 V2
FF30 IH EN 74-216-201 v1.20.doc Page 11 of 26
3 Installation
3.1 Connections
FF30 must be placed on a stable and horizontal bedplate.
The mains cable (1) is
connected to a single-phase
power supply with earth.
Compressed air is connected to
(2) by use of the supplied quick
release clutch.
All exhaust air is collected and
exhausted through the exhaust
filter (3)
3
2
1
The filler is connected to (4).
RS485 (5) is used for “remote
access” (e.g. during service, or
monitoring)
5
4