Watson-Marlow FF30 V2 - Manual (Page 12)

INSTRUCTION HANDBOOK
FF30 V2
FF30 IH EN 74-216-201 v1.20.doc Page 12 of 26
3.2 Mounting of format parts
3.2.1 Bottle format parts
A set of bottle format parts consists of 1 star wheel and 3 guides. All 4 are marked with one number
which together composes the customised parts for one specific bottle size. The number does not
have any reference to the bottle size; it is merely a number which is engraved on the parts to ensure
that the matching parts can be recognized.
Change of bottle format parts
Remove the finger screw
and dismount the bottle ejector. Move the plate with the inlet sensor to the right
Move the star wheel Finally move the guides one by one…
When the last guide has been removed another
size of format parts can be mounted. This is done
the opposite way of the dismounting procedure.