AEC OS Series Gravimetric Batch Blenders - Manual (Page 25)

Page 24 of 118
2-4 Safety Considerations
The terms NOTICE, CAUTION, WARNING, and DANGER have specific
meanings in this manual. See Section 11 for a complete list of specific safety
warning information.
A NOTICE is used to indicate a statement of company policy directly or
indirectly related to the safety of personnel or protection of property.
A CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
A WARNING indicates a potentially hazardous situation which, if not
avoided could result in death or serious injury.
A DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This word will be limited
to the most serious situation(s).
The term IMPORTANT emphasizes areas where equipment damage
could result, or provides additional information to make a step or
procedure easier to understand. Disregarding information marked
IMPORTANT would not be likely to cause personal injury.
REPORTING A SAFETY DEFECT
NOTE: If you believe that your equipment has a defect which could cause
injury, you should immediately discontinue its use and inform AEC, Inc.,
at our address listed in this manual.
The principle factors which can result in injury are:
1. Failure to follow proper operating and clean-out procedures, i.e.
lockout/tagout.
2. Failure to maintain a clean and safe working environment.