Extreme Networks BlackDiamond 8800 Series - Manual (Page 107)

Making Network Interface Cable Connections
BlackDiamond 8800 Series Switches Hardware Installation Guide 107
Figure 62: Connecting a 10G4Ca Module Port
To disconnect a cable from a 10G4Ca module:
1 Holding the cable connector with one hand, press it against the module front panel as you use the
other hand to pull back evenly on the latch (
Figure 63 ).
Figure 63: Disconnecting a cable from a 10G4Ca port
2 Make sure the latch is pulled into the fully disengaged position.
3 Pull the cable connector straight off the port connector.
BD_157
BD_158A