Extreme Networks BlackDiamond 8800 Series - Manual (Page 75)

Unpacking the BlackDiamond 8810 Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide 75
Unpacking the BlackDiamond 8810 Chassis
CAUTION
The BlackDiamond 8810 chassis weighs almost 80 pounds. Proper lifting and moving of the chassis requires two
people.
To unpack the BlackDiamond 8810 chassis:
1 Verify that the Tilt Watch and Shock Watch indicators display a white state as shown in Figure 38 .
Figure 38: Tilt Watch and Shock Watch Indicators
CAUTION
Do not proceed with unpacking the chassis if either the Tilt Watch indicator or the Shock Watch indicator displays a
red warning state. Immediately contact Extreme Networks if a red condition occurs.
2 Open the flaps and remove the contents from the upper shipping carton (see Figure 34 ).
EX_084
Tilt watch
Tilt watch
in white state
Tilt watch
in red state
Shock watch
in white state
Shock watch
in red state
Shock watch