Extreme Networks BlackDiamond 8800 Series - Manual (Page 151)

Repacking the BlackDiamond 8806 Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide 151
8 Slide the top of the BlackDiamond shipping carton down and over the BlackDiamond 8806 chassis
(see
Figure 104 ).
Figure 104: Placing the Carton over the BlackDiamond 8806 Chassis
9 Insert the clip locks (see Figure 105 ).
a Place your thumb and index finger inside the clip lock to grasp the prongs.
b Squeeze the prongs inward, applying equal pressure on each side.
c Push the prongs inward until the clip lock is secured onto the carton.
Repeat these steps to insert each of the remaining clip locks.
CAUTION
Proper installation of the clip locks is critical for safe shipment of the BlackDiamond 8806 chassis. Make sure that
the clip locks are secure and accurately installed.
Figure 105: Clip Locks on the BlackDiamond 8806 Chassis Shipping Carton
ASP016a
EX_121
Place box
over
chassis
Insert & close
4 clip locks
to secure box
EX_111A
Clip lock
Open
lock
Squeeze prongs
to unlock