Extreme Networks BlackDiamond 8800 Series - Manual (Page 81)

Rack-Mounting the BlackDiamond 8800 Series Chassis
BlackDiamond 8800 Series Switches Hardware Installation Guide 81
Figure 45: Mounting the 19-inch Helper Bracket onto the System Rack
4 Lift the back of the empty BlackDiamond 8800 series chassis onto the 19-inch helper bracket.
5 Slowly guide the chassis into the system rack until the mounting brackets are flush against the rack
uprights.
6 Secure the chassis to the system rack using eight rack mounting screws. (Screws are not provided.)
Be sure that the screws are secure. Refer to
Figure 46 and figure for the screw locations.
NOTE
Figure 46 and figure show a standard rack mount. For mid-mount installation, use the same mounting locations
shown in the figure, but insert the screws through the designated slot locations of the mid-mount brackets.
EX_086A