Troubleshooting ead fast deployment, Users cannot be redirected correctly, Symptom – H3C Technologies H3C S7500E Series Switches User Manual

Page 126: Analysis, Solution

Advertising
background image

6-5

Pinging 192.168.2.3 with 32 bytes of data:

Reply from 192.168.2.3: bytes=32 time<1ms TTL=128

Reply from 192.168.2.3: bytes=32 time<1ms TTL=128

Reply from 192.168.2.3: bytes=32 time<1ms TTL=128

Reply from 192.168.2.3: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.2.3:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 0ms, Maximum = 0ms, Average = 0ms

In addition, if the user uses a web browser to access any external website, the user will be

taken to the web server, which provides the client software download service.

Troubleshooting EAD Fast Deployment

Users Cannot be Redirected Correctly

Symptom

When a user enters an external website address in the web browser, the user is not redirected

to the specified URL.

Analysis

z

The address is in the string format. In this case, the operating system of the host regards

the string a website name and tries to have it resolved. If the resolution fails, the operating

system sends an ARP request with the address in the format other than X.X.X.X. The

redirection function does redirect this kind of ARP request.

z

The address is within the freely accessible network segment. In this case, the device

regards that the user is trying to access a host in the freely accessible network segment,

and redirection will not take place, even if no host is present with the address.

z

The redirect URL is not in the freely accessible network segment, no server is present with

that URL, or the server with the URL does not provide web services.

Solution

z

Enter an IP address that is not within the freely accessible network segment in dotted

decimal notation (X.X.X.X).

z

Ensure that the device and the server are configured correctly.

Advertising