H3C Technologies H3C S7500E Series Switches User Manual
Page 153
8-16
Log on to the iMC management platform and select the Service tab. Then, select Portal
Service Management > Server from the navigation tree to enter the portal server configuration
page, as shown in
.
z
Input the URL address of the portal authentication main page, in the format of
http://ip:port/portal, where ip and port are those configured during the iMC UAM installation.
Usually, the default setting of port 8080 is used.
Figure 8-5 Portal server configuration
# Configure the IP address group.
Select Portal Service Management > IP Group from the navigation tree to enter the portal IP
address group configuration page. Then, click Add to enter the page for adding an IP address
group, as shown in
.
z
Input the name, start IP address, and end IP address of the IP address group. Note that the
IP address of Host (2.2.2.2) must be in the IP address range of this group.
Figure 8-6 Add an IP address group
# Add a portal device.
Select Portal Service Management > Device from the navigation tree to enter the portal
device configuration page. Then, click Add to enter the page for adding a portal device, as
shown in
z
Type the device name Switch.
z
Type the IP address of the interface on the switch for connecting the user.
z
Type the key, which must be the same as that configured on the switch.