H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 50)

42
Step Command Remarks
2. Associate the static route
with a track entry to
check the reachability of
the next hop.
ip route-static dest-address { mask | mask-length }
next-hop-address [ track track-entry-number ]
[ preference preference-value | description
description-text ]
Not configured by
default.
NOTE:
•
You can associate a nonexistent track entry with a static route. The association takes effect only after you
use the trafck command to create the track entry.
• If a static route needs route recursion, the associated track entry must monitor the next hop of the
recursive route instead of that of the static route; otherwise, a valid route may be considered invalid.
• For more information about static route configuration, see Layer 3 Configuration Guide.
Associating track with WLAN uplink detection
When the uplink of an AC fails, clients cannot access external networks through the AP that is connected
to the AC. To check the reachability of the uplink in real time, establish association between track and
WLAN uplink detection.
• When the track entry is in Positive state, the AC enables the radio of the AP. Wireless clients can
associate with the AP.
• When the track entry is in Negative state, the AC disables the radio of the AP. Wireless clients
cannot associate with the AP.
• When the track entry is in Invalid state, the AC does not change the radio state of the AP.
The association guarantees that when the uplink of an AC fails, clients can associate with APs connected
to another AC.
To associate track with the WLAN uplink detection feature:
Step Command Remarks
1. Enter system view. system-view N/A
2. Associate the WLAN uplink
detection feature with a
track entry
wlan uplink track track-entry-number Not configured by default.
NOTE:
For more information about configuration on AC, AP, and WLAN uplink detection, see WLAN Service
Configuration Guide.
Displaying and maintaining track entries
Task Command Remarks
Display information about the
specified or all track entries.
display track { track-entry-number |
all } [ | { begin | exclude |
include } regular-expression ]
Available in any view