Panasonic Toughpad FZ-F1 - Manual (Page 24)

24
Installing and removing the battery
Make sure to turn off the unit before replacing the battery.
Installing the battery
1. Remove the battery cover (page 17).
2. Insert the tabs at the battery’s terminal side (A) into the notches
of the unit (B), and then lower the battery into place (C).
IMPORTANT
• Observe the following to ensure the waterproof and dustproof
performance of the unit.
– When installing the battery, make sure there is no debris lodged
in the gasket that seals the unit and in the area around the
battery.
Installing and removing the battery