Panasonic Toughpad FZ-F1 - Manual (Page 42)

42
Specifications are subject to change without notice.
*1 1 MB = 1 048 576 bytes, 1 GB = 1 073 741 824 bytes
*2 Operation has been tested and confirmed using the following
Panasonic brand memory cards: SD (up to 2 GB), SDHC (up to
32 GB). Compatibility with other SD devices is not guaranteed.
*3 Does not guarantee operation of all USB-compatible
peripherals.
*4 This mode may not operate properly depending on the type of
glove.
*5 Only single-finger operation is enabled.
*6 The AC adaptor is designed for use with power sources that
supply up to 240 V AC. The AC cord supplied with the AC
adaptor is designed for use with power sources that supply up to
125 V AC.
*7 Actual performance varies depending on usage conditions,
connected peripherals, etc. Typically, operating time is reduced
in colder environments.
*8 Results measured with a stable signal, a new battery, and at a
stationary position. Results will vary depending on the signal
quality, operating environment, and system settings.
*9 As defined by the JEITA Specification, Working Mode B. (Two
times reading in every 10 seconds)
*10 Varies depending on usage conditions.
*11 When the battery is fully charged (or not being charged) and the
unit is off.
*12 Rated power consumption
*13 Actual size may vary by unit configuration.
*14 Average weight. Actual weight may vary by unit configuration.
*15 Do not expose the skin to this product when using the product in
a hot or cold environment.
When using the product in hot or cold environments, some
peripherals may not perform properly. Confirm the
recommended operation environment of the peripherals.
Using the product continuously in hot environments will shorten
the product life. Avoid continuous use in these types of
environments.