Operation, S25/s50 protect/lock – Grass Valley Jupiter v.1.0 User Manual
Page 89
Jupiter L-S Series Control Panels Installation and Operating Manual
89
S25/S50 Control Panels
Figure 36. S50
S50
8 Destinations
Sources
Configured for 8 Destinations
Operation
1.
Select the destination button on the right you wish to control.
2.
Press a source button (light green). Selecting the source completes the
switch to the destination.
S25/S50 Protect/Lock
S25 and S50 panels cannot initiate or remove protects or locks.
by another panel, the selected source
button will illuminate steady amber and the destination will not switch. If
the destination has been
by another panel, the selected source button
will illuminate steady red and the destination will not switch. To continue,
the destination must be unprotected or unlocked by the panel used to set
the protect or lock.