Grass Valley K2 AppCenter v.9.0 - Manual (Page 133)

2. To view the Properties dialog box for the selected asset, do one of the following:
• Select Clips | Properties .
• Select Properties in the asset context menu.
• Click the Properties button in the Clips pane.
If the Properties button is not displayed in the Clips pane, refer to assignable buttons in the Guide
to using the Clips pane section.
The Asset Properties dialog box appears.
3. Click the General tab, then select the Locked check box to lock the asset.
4. Click OK to close the Properties dialog box.
Related Topics
Guide to using the Clips pane on page 118
Working with the Recycled Bin
To work with the recycled bin, refer to the following topics.
Viewing the Recycled Bin contents
• In the Clips pane, select the Current Bin label, then select Recycled Bin .
The Recycled Bin assets are displayed in the asset list as the current bin. You can work with
assets in the Recycle Bin just like any other bin.
Emptying the Recycled Bin
1. In the Clips pane, select the Current Bin label, then select the Organize Bins .
2. In the Organize Bins dialog box, select Recycled Bin from the bin list.
3. Click Empty , then Yes to confirm.
4. Close the Organize Bins dialog box.
Bypassing the Recycled Bin when deleting
NOTE: Holding down the SHIFT key during delete also bypasses the Recycled Bin.
1. In the Clips pane, select the Current Bin label, then select the Organize Bins .
2. In the Organize Bins dialog box, choose Recycled Bin .
3. Select Remove items immediately when deleted or hold down the SHIFT key during delete.
4. Close the Organize Bins dialog box.
29 October 2012 K2 AppCenter User Manual 133
Managing clip media