Grass Valley Kayak HD Installation v.6.9.4 Jun 02 2011 - Manual (Page 162)

162 Kayak HD — Installation and Service Manual
Section 4 — Maintenance
Dipswitch settings are all in the up or Normal position. The dipswitch is
located next to the Flash card on the control processor board, as shown in
Figure 108 .
Figure 108. Kayak Control Processor Board - S2 Boot Mode Dipswitch Location
CAUTION If the Dipswitch settings are not in the up or Normal position, the system may
not boot.
Figure 109 shows the S2 Boot Mode Dipswitch settings in the up or Normal
position.
Figure 109. Kayak Control Processor Board - S2 Boot Mode Dipswitch Setting
8448_60_Ct
rlB
rdDipSwitch
All Up=Normal
Down=Factory Use Only
8448_60_Ct
rlB
rdDipSwitchSet
S2 Boot Mode Dipswitch