Grass Valley NV9648 v.1.1 - Manual (Page 30)

20
Configuration
NV9648 Panel Configuration Page(s)
Configuration Page for Client Mode
This is a sample NV9648 panel configuration page for client mode:
Fig. 4-1: NV9648 Configuration Page (in Client Mode)
There are 5 button function types for a panel in client mode:
Destination Lock Destination Protect Quick Source
Source Take
These are described in Button Functions for Client Mode on page 34.
Characteristics of Client Mode
The panel has 3 sections that are independent control units. Each unit — having one display and
9 buttons — corresponds to a destination.
One or more NV9648s (clients) operate with an NV9649 (server). The NV9649 can assign a desti-
nation to any of an NV9648’s sections and also assign sources to the source buttons of any of an
NV9648’s sections.
In client mode, clients show current sources in their displays when the NV9649 is in source mode
and show the sections’ destinations when the NV9649 is in destination mode.
(Refer to the NV9649 Users’ Guide.)
 Before you can complete an NV9648 “client” configuration, you must have defined an
NV9649 server configuration. The NV9648 references the NV9649 by its panel ID.
Button
Definition
Section
GPIO
Definitions
Panel
Options
Panel
Image: