Monitor backplane locations, Installing monitor cards in the nv8576-plus, Nv8144 nv8280 – Grass Valley NV8500 Series v.3.5 User Manual

Page 109

Advertising
background image

93

NV8500 Series

User’s Guide

3 For each card, press the ejector lever(s) inward, making sure each card is fully seated in its

slot.

4 Close the frame door. The door must be closed for the router cooling system to work prop-

erly.

Installing Monitor Cards in the NV8576-Plus

Follow the procedure for installing monitor cards for the NV8576 for each frame of the NV8576-
Plus (expanded or stand-alone).

Monitor Backplane Locations

NV8144

If you are facing the rear of the router, the monitor’s one backplane slot is just to the left of the
output cards and just to the right of the system connectors. (See Figure 1-5 on page 8.)

NV8280

If you are facing the rear of the router, the monitor backplanes slots at the left end of the output
bay: There are two slots: one for the output monitor backplane and one for the input monitor
backplane. The input monitor backplane is just to the right of the output monitor backplane, as
shown here:

Fig. 5-3: Monitor Backplanes in NV8280

Output Monitor Card

Input Monitor Card

Advertising
This manual is related to the following products: