Nv8140 nv8280, Nv8140, Nv8280 – Grass Valley NV8500 Series v.3.5 User Manual

Page 82: Crosspoints

Advertising
background image

66

Crosspoints

Overview of Crosspoints

NV8140

An NV8140 has slots for two normal crosspoint cards and a redundant crosspoint card. Both
crosspoint cards and the redundant crosspoint card receive all inputs. The redundant crosspoint
card is in stand-by mode; it does nothing unless one of the normal crosspoints fails.

The active crosspoint cards send their outputs to the output cards.

If fail-over is automatic and an active card fails, the NV8140’s control card causes the redundant
card to take over for the failed active card. When the redundant card becomes active, it sends its
outputs to the output cards.

The redundant crosspoint is installed in the middle crosspoint slot:

NV8280

In an NV8280, the router’s switching matrix is distributed across 8 crosspoint cards. Each card
switches a specific subset of the inputs or outputs. Crosspoint cards are installed in crosspoint
slots 1–4 and 7–10. The optional redundant crosspoint module is installed in slots 5 and 6:

Fig. 3-1: NV8280 (Front View)

FAN

INPUTS

1–144

(8 cards)

SEC. CONTROL

PRIM. CONTROL

(16 cards)

RED. XPT

XPT

B

POWER SUPPLY

POWER SUPPLY

OUTPUTS

1–288

XPT

A

Inputs 1–144 are received by crosspoint
cards A and B.

Crosspoint card A distributes the upper 9
outputs of all the output cards. (Those are
outputs 1–9, 19–27, and so on.)

Crosspoint card B distributes the lower 9
outputs of all the output cards. (Those are
outputs 10–18, 28–36, and so on.)

INPUTS 145–288

INPUTS 145–288

INPUTS 1–144

INPUTS 1–144

INPUTS 1–144

INPUTS 1–144

FAN

INPUTS

1–144

INPUT MONITOR

(16 cards)

OUTPUTS

1–288

OUTPUTS

289–576

OUTPUT MONITOR

(16 cards)

INPUTS

145–288

(16 cards)

SECONDARY CONTROL

CROSSPOINT CARDS

INPUTS 145–288

INPUTS 145–288

REDUNDANT CROSSPOINT

(16 cards)

OUTPUTS 289–576

1

2

3

4

7

8

9

10

5, 6

OUTPUTS 1–288

PRIMARY CONTROL

Inputs 1–144 are received by
crosspoint cards 1, 2, 7, and 8.

Inputs 145–288 are received by
crosspoint cards 3, 4, 9, and 10.

Outputs 1–288 are distributed
by crosspoint cards 1–4.

Outputs 289–576 are distributed
by crosspoint cards 7–10.

Advertising
This manual is related to the following products: