Grass Valley Profile XP Aug 16 2004 - Manual (Page 202)

Chapter 6 Modifying a Channel: Audio Settings
202 Profile XP System Guide 23 July 2004
7. Click the left-hand drop-down list arrow in the Embedded column for the channel pair
you want to configure, and select a video output as shown.
NOTE: With one audio board, only the first 4 video outputs are selectable, since
embedded audio can only be allocated by groups of 4 channels. With two audio
boards, up to 8 video outputs are selectable. In some cases (two audio boards and
either three 2In/2Out boards or one 2In/2Out and one 4Out board), you may have
to select embedded audio outputs first, then select the audio inputs for each audio
board to be able to select all the desired embedded outputs.
8. Click the right-hand drop-down list arrow in the Embedded column for the channel
pair you want to configure, and select an audio group and channel pair as shown.
NOTE: Up to two audio groups (8 audio channels) can be embedded on a single
video output.
9. Click Finish to save your settings.