Sybase 11.9.x-12.5 User Manual
Page 141
CHAPTER 6 Adaptive Server Error Messages
815
1016
16
Abstract Plan (AP) : There is no destination group for the new AP. The AP was not
created. Specify a destination group within the statement or enable the AP capture mode.
Explanation:
Adaptive Server could not perform the requested action. Rewrite the
command to conform to the requirement specified in the error message
.
1017
18
Abstract Plan (AP) : sysqueryplans manager error. The operation was aborted, no AP was
created or deleted.
Explanation:
Command failed due to internal Adaptive Server problem. Perform any
diagnostic action indicated by the message. Report the error to your System
Administrator.
1018
16
Abstract Plan (AP) : There is no AP group with the name ’%.*s’. The AP mode settings
will not be changed.
Explanation:
Adaptive Server could not perform the requested action. Rewrite the
command to conform to the requirement specified in the error message.
1019
16
Abstract Plan (AP) : The %s mode is already enabled for group ’%.*s’. The AP mode
settings will not be changed. To enable the LOAD mode for another group, disable it first.
Explanation:
Adaptive Server could not perform the requested action. Rewrite the
command to conform to the requirement specified in the error message
.
1020
16
Abstract Plan (AP) : The REPLACE sub-mode is already enabled.
Explanation:
1021
16
Abstract Plan (AP) : The DUMP mode is not enabled. Adaptive Server cannot enable the
REPLACE sub-mode. Enable the DUMP mode first.
Explanation:
Adaptive Server could not perform the requested action. Rewrite the
command to conform to the requirement specified in the error message
.
1022
16
Abstract Plan (AP) : The %s mode is not currently enabled. The AP mode settings will
not be changed.
Explanation:
Adaptive Server could not perform the requested action. Contact your
System Administrator.
1023
0
Abstract Plan (AP) : The LOAD mode is not enabled. Adaptive Server cannot enable the
EXISTS CHECK sub-mode. Enable the LOAD mode first.
Explanation:
Refer to the Adaptive Server Reference Manual for information about the
stored procedure you were running when you got this message.
Number
Severity
Text and Explanation