Sybase 11.9.x-12.5 - Manual (Page 308)

Server Error Messages 5800 - 5899
982
5861 16 The current ’max memory’ value ’%ld’, is not sufficient to change the p arameter ’%s’
to ’%ld’. ’max memory’ should be greater than ’total logical memory’ ’%ld’
required for the configuration.
Explanation: Refer to the writeup for this error.
5862 18 Invalid portion encountered.
Explanation: Each ASE configuration parameter has certain attributes, called portions
(such as name, datatype etc) associated with it. If the server finds invalid attributes for a
parameter, this error is raised. Contact Sybase Technical Support with the server version
and SWR level, and the text of the command that raised the error.
5863 18 Invalid group encountered.
Explanation: Refer to the writeup for this error.
5864 18 Invalide option encountered in `%s'.
Explanation: Error occurred during validation of configuration parameters for async i/o
or online engines. Sybase Technical Support with the server version and SWR level, and
the text of the command that raised the error.
5865 18 error in os_get_cpu_count: %d
Explanation: Refer to the writeup for this error.
5866 10 Configuration file `%s' has been written and the previous version has been renamed to
`%s'.
Explanation: Refer to the writeup for this error.
5867 16 The wash size for the %dk buffer pool in cache %s has been incorrectly configured. It
must be a minimum of %d buffers and a maximum of %d percent of the number of buffers
in the pool.
Explanation: Refer to the writeup for this error.
5868 16 Invalid type configured for cache %s. Cache type may be one of mixed OR log only but
NOT both.
Explanation: Refer to the writeup for this error.
5869 16 Invalid buffer size of %dk for cache %s. Valid buffer sizes are powers of 2 between %dk
and %dk inclusive.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
5870 16 An invalid buffer size of %dk was encounterd in cache %s. Valid buffer sizes for caches
are powers of 2 between %dk and %dk inclusive.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
5871 16 Invalid pool size of %dk (%d buffers) encountered for the %dk pool in cache %s. Buffer
pools must have a minimum total size of %dk or %d buffers, whichever is greater.
Explanation: Command failed. Check syntax and semantics. Check your configuration
file and any configuration parameters supplied.
Number Severity Text and Explanation