Sybase 11.9.x-12.5 - Manual (Page 72)

Component Integration Services Error Messages
746
11205 16 Datatype `%s' is unsupported for server `%.*s'.
Explanation: The datatype is not supported by the
server where the remote object is located. Rewrite the
command using a valid datatype.
11206 16 Unable to connect to server `%.*s'.
Explanation: Refer to the writeup “Unable to Access
Remote Server” in Appendix A “Troubleshooting” of
the
Component Integration Services User's
Guide.
11207 10 Warning, table definition does not contain all columns
found in remote object `%.*s'; (defined: %d found:
%d)
Explanation: This is an informational message.
Contact the Object Owner about the warning issued in
this message.
11208 16 No column named `%.*s' found in remote object
`%.*s'.
Explanation: If the syntax is correct, refer to the
writeup “Problem Retrieving Data From Remote
Objects” in Appendix A “Troubleshooting” of the
Component Integration Services User's Guide.
11209 16 Column type mismatch in remote object `%.*s' for
column `%.*s'; (defined: %d found: %d).
Explanation: Refer to the writeup “Problem
Retrieving Data From Remote Objects” in Appendix
A “Troubleshooting” of the
Component Integration
Services User's Guide.
11210 16 Column length mismatch in remote object `%.*s' for
column `%.*s'; (defined %d found: %d).
Explanation: Refer to the writeup “Problem
Retrieving Data From Remote Objects” in Appendix
A “Troubleshootin ” of the
Component Integration
Services User's Guide.
11211 16 Handling of null values in remote object `%.*s' for
column `%.*s' differs from that defined; (defined: `%s'
found: `%s').
Explanation: Refer to the writeup “Problem
Retrieving Data From Remote Objects” in Appendix
A “Troubleshooting” of the
Component Integration
Services User's Guide.
Number Severity Text and Explanation