Sybase 11.9.x-12.5 - Manual (Page 58)

Backup Server Error Messages 5.1.2 - 6.89.2
732
Backup Server Error Messages 5.1.2 - 6.89.2
4.147.2 2 Operating system error. Code %1! message %2!.
Explanation: The message has 93 secondary state
values used to determine where a failure occurred in
sybmultbuf.
Number Severity Text and Explanation
Number Severity Text and Explanation
5.1.2 2 The mirror devices (site: %1!) and the primary
device(site: %2!) must reside at the same site.
Explanation: This message is part of the
uncompleted dump mirroring feature. All mirrors for
a stripe must reside on the same host.
5.2.2 2 Cannot allocate the login record.
Explanation: This error occurs when the dblogin call
fails, probably due to a memory resource problem.
5.3.2 2 Cannot open a connection to the slave site `%1!'.
Explanation: An attempt to connect to a remote
Backup Server encountered this failure. Look for:
Memory or swap space shortage
No remote Backup Server running
Wrong listening address
5.4.2 2 RPC (`%1!') initialization fails.
Explanation: Internal error, contact Sybase
Technical Support. Failure in dbrpcinit.
5.5.2 2 Cannot add a parameter to the RPC (`%1!') call
Explanation: Internal error, contact Sybase
Technical Support. Failure in dbrpcparam.
5.6.2 2 Cannot send the RPC (`%1!').
Explanation: Check to see that the local or remote
Backup Server is still available.
5.7.2 2 RPC (`%1!') execution failed.
Explanation: These messages point to difficulties in
issuing an RPC to a remote Backup Server. Probable
cause is an Open Server programming error.