Yaskawa SmartTrac PCIM Card - Manual (Page 20)

SMART TRAC Genius PCIM Card
16
••
Configuring the Smart Trac Genius Card Technical Manual 3554-0080
The Watchdog Timer monitors the host systemn and resets the Smart Trac
Genius card if the host malfunctions. Unless supported by the host system, it
should remain disabled. When enabled, the Watchdog Timer requires that the
Smart Trac Genius card receive a pulse from the host every 7 milliseconds. If
not, it resets the card.
SW2 Non-Default Settings – Position 8 (Outputs)
Outputs Position 8
Outputs Disabled (default) 0
Outputs Enabled 1
Watchdog Timer