iSys i36 - Manual (Page 6)

i36 ImageMaster User Guide 7
2
LOCATION OF THE I36 IMAGEMASTER
Properly locating the i36 ImageMaster will help to enhance it’s performance and
extend it’s useful life. The plotter has a wide operating range and functions well under
various conditions. For best performance, we recommend the following conditions:
- Place in a well-ventilated, stable environment free from abrupt temperature
or humidity changes.
- temperature - 10 to 30 0 C (50 to 86 0 F).
- Relative Humidity 40% and 70% (non-condensing).
- Place on a firm, flat surface.
- Avoid sources of direct heat and sunlight.
- Allow a minimum of 20cm (9in) backside clearance for proper airflow.
NOTE: The four casters are equipped with locks. After you place the plotter in it’s
permanent site, set the four casters to the locked position.
CAUTION: Do not touch the thermal print head. Natural body oils can
damage it. Scratches in the print head will affect image quality. Print head
damage caused by users is not covered by warranty.
CAUTION: Do not block the air vents. Proper airflow helps maintain
operating temperature.