KACO blueplanet gridsave eco 5.0 TR1 - Manual (Page 18)

Installation and startup
Page 18 Operating instructions for blueplanet-gridsave eco_EN
Authorised electrician
6.2 Construction and installation
NOTE
The construction and installation of the device may be performed only by a qualified electrician in
accordance with the valid standards and regulations.
CAUTION
Risk of injury during installation and transport
In the event of inadequate wall-mounting and careless transport, the device can fall and cause
injury.
› Select suitable mounting location and mounting base.
› Use mounting material corresponding to or included with the base for mounting the device.
› The device should only be transported with the help of a second person.
3
2
1
Figure 4: Removing the device from the packaging
Key
1
Carton 3 Bidirectional battery inverter
2 Protective packaging
Remove the device from the packaging
1. Open the carton at the top.
2. Remove installation material and documentation.
3. Remove the top protective packaging from the device.
4. Place the protective packaging back into the carton during mounting.
» Ensure clear access for connection.
1
2
3
5
4
Figure 5: Cover plate Figure 6: Terminal cover and expansion card