Magnum Energy Series Stacking Cable Kit (ME-SSI) - Manual (Page 2)

©
2010 Magnum Energy, Inc.
Disclaimer of Liability
The use of this manual and the conditions or methods of
installation, operation, use, and maintenance of the ME-SSI (Series
Stacking Interface) are beyond the control of Magnum Energy, Inc.
Therefore, this company assumes no responsibility and expressly
disclaims any liability for loss, damage, or expense whether direct,
indirect, consequential, or incidental that may arise out of or be
in any way connected with such installation, operation, use, or
maintenance.
Due to continuous improvements and product updates, the images
shown in this manual may not exactly match the unit purchased.
Restrictions on Use
The ME-SSI may only be used in life-support devices or systems
with the express written approval of Magnum Energy. Failure
of the ME-SSI can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or
effectiveness of that device or system. If the ME-SSI fails, it is
reasonable to assume that the health of the user or other persons
may be endangered.
Contact Information
Magnum Energy, Inc.
2211 West Casino Rd.
Everett, WA 98204
Phone: (425) 353-8833
Fax: (425) 353-8390
Web: www.magnumenergy.com
Revisions Required
Your MS4024 inverter and remote control (if used) must have the
correct revision level in order to work in a series stacked confi gu-
ration. The MS4024 requires a revision of 2.0 or higher. To use a
remote control (i.e., ME-RC50 or ME-ARC) with this product, you
need a revision of 1.2 or higher.
i