Magnum Energy Series Stacking Cable Kit (ME-SSI) - Manual (Page 3)

©
2010 Magnum Energy, Inc. ii
IMPORTANT PRODUCT SAFETY INSTRUCTIONS
This manual contains important safety instructions that must be
followed during the installation and operation of this product. Read
all instructions and safety information contained in this manual
before installing or using this product.
• All electrical work must be performed in accordance with local,
state, and federal electrical codes.
• This product is designed for indoor/compartment installation.
DO NOT expose to rain, snow, moisture, or liquids of any type.
• Use insulated tools to reduce the chance of electrical shock or
accidental short circuits.
• Remove all jewelry such as rings, watches, bracelets, etc., when
installing or performing maintenance on an inverter.
• Always disconnect the batteries or energy source prior to
installing or performing maintenance on an inverter. Live power
may be present at more than one point since an inverter utilizes
both batteries and AC. Turning off the inverter may not reduce
this risk. As long as AC power is connected, it will pass through
the inverter regardless of the ON/OFF power switch setting.
• Always verify proper wiring prior to starting an inverter.
• Do not operate an inverter if it has been damaged.
• Do not dismantle an inverter; there are no user-serviceable
parts contained in this product. Attempting to service the unit
yourself could cause electrical shock. Internal capacitors remain
charged after all power is disconnected.
• No AC or DC disconnects are provided as an integral part of the
inverter. Both AC and DC disconnects must be provided as part
of the system installation.
WARNING: This symbol indicates that failure to take a
specifi ed action could result in physical harm to the user.
CAUTION: This symbol indicates that failure to take a
specifi ed action could result in damage to the equipment.
Info: This symbol indicates information that emphasizes
or supplements important points of the main text.
Safety symbols
To reduce the risk of electrical shock, fi re, or other safety hazard,
the following safety symbols have been placed throughout this
manual to indicate dangerous and important safety instructions.