Elmo Network Pan-Tilt-Zoom Camera PTC-201CIP - Manual (Page 35)

- 34 -
(1) Zoom operation
Clicking the buttons effects zoom operation. Clicking the TELE (T-) buttons and the
WIDE (-W) buttons provides zoom-in and zoom-out operation, respectively. The
buttons
or coarse control buttons enable the zoom position to change by a large
amount, and the buttons or fine control buttons permit the zoom position to
change by a small amount.
(2) Iris operation
By clicking the buttons
, the iris can be adjusted manually. Clicking the OPEN (-O)
buttons opens the iris diaphragm, and clicking the CLOSE (C-) buttons closes the iris
diaphragm. The buttons
or coarse control buttons enable the lens aperture to
change by a large amount, and the buttons or fine control buttons permit the
lens aperture to change by a small amount. Clicking the AUTO IRIS button
brings the camera into the Auto Iris mode.
(3) Focus operation
By clicking the buttons
, the focus can be adjusted manually. Clicking the NEAR
(N-) buttons and the FAR (-F) buttons shifts the focus toward you and away from you,
respectively. The buttons
or coarse control buttons enable the focus shift to
change by a large amount, and the buttons or fine control buttons permit the
focus shift to change by a small amount. Clicking the AUTO FOCUS button
brings the camera into the Auto Focus mode.
(4) Move operation
By clicking the 1 to 6 buttons
, the camera can be moved to the registered preset
position assigned to each button.
(5) Operating PAN/TILT
To move the camera while watching the moving image, drag the slider boxes
horizontally and vertically on the scroll bars
and . When the mouse button is
clicked on some point within the area
, the marker moves to the point on which the
mouse button was clicked, and the camera also moves to the position corresponding that
point. Clicking the RESET button
matches the PAN/TILT position stored in the
camera with the actual position. Clicking the HOME button orients the camera
frontward.
8
7
9
11 10
6
5
4
3
2
1