Eaton Electrical Powerware 5130 Rack/Tower UPS 1250-3000 VA - Manual (Page 29)

INSTALLATION
EATON Powerware ® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2
www.powerware.com
23
UPS Setup
The Powerware 5130 UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
“Rackmount Setup;” otherwise, continue to “Tower Setup” on page 25.
Rackmount Setup
The rail kit can be mounted in 19-inch panel (48 cm) racks from 24 to
30 inches (61 to 76 cm) deep and includes:
S Left and right sliding rail assemblies
S (12) M5 washers
S (12) M5 ×12 mm Phillips
® -head screws
S (8) M4 ×5 mm Phillips-head screws
S (2) mounting brackets with handles
Required Tools
To assemble the components, a #2 Phillips screwdriver may be needed.