Eaton Electrical Powerware 5130 Rack/Tower UPS 1250-3000 VA - Manual (Page 34)

INSTALLATION
EATON Powerware ® 5130 Rack/Tower UPS (1250–3000 VA) User’s Guide S 164201730 Rev 2
www.powerware.com
28
Installing the UPS
NOTE Do not make unauthorized changes to the UPS or accessories; otherwise, damage
may occur to your equipment and void your warranty.
See “UPS Rear Panels” on page 33 for the rear panel of each model.
To install the UPS and optional EBMs:
1. If installing an optional EBM, continue to Step 2; otherwise,
continue to Step 3.
2. Plug the EBM cable into the battery connector. Plug the EBM
communication cable into the RJ-11 port. See Figure 8.
Up to four EBMs may be connected to the UPS.
EBM Communication
Cable
EBM Cable
EBM Battery Connectors
Figure 8. UPS Installation with Four EBMs