Curtis IP1490 - Manual (Page 11)

OPERATING INSTRUCTIONS
10
Programming radio station presets:
You can program as many as 10 FM and 10 AM radio station presets. After you
program a station, you can tune to the station by pressing one of the SKIP/TUNE
Buttons.
To program a radio station:
1. Press the POWER Button to turn on your radio.
2. Press the FUNCTION Button one or more times until TUNER appears
on the display.
3. Press the BAND Button to select AM or FM.
4. Press and hold one of the SKIP/TUNE UP or DN Buttons to select a radio
station.
5. Press and hold the MEM/CLK Button to activate the programming mode.
6. Press one of the SKIP/TUNE UP or DN Buttons to select the preset number
you want to assign the station to.
7. Press the MEM/CLK Button to store the station with the preset number you
selected.
8. Repeat Steps 4 through 7 to program additional presets.