Curtis IP1490 - Manual (Page 13)

OPERATING INSTRUCTIONS
12
To set up a CD program (program up to 20 tracks):
1.
Press the POWER Button to turn on your unit, then Press the FUNCTION
Button one or more times until CD track "--" appears on the display.
2. Insert a CD into the CD compartment. If the CD starts playing, press the
STOP Button.
3. Press the MEM/CLK Button. "01" appears on the display.
4. Press one of the SKIP/TUNE UP or DN Buttons one or more times to select
the first track you want to program.
5. Press the MEM/CLK Button to confirm your selection.
6. Repeat Step 4 and 5 to add more tracks to your playlist.
7. When you have finished setting, press the PLAY/PAUSE Button to begin
programmed playback.
To cancel a CD program:
While the CD is playing, do one of the following:
* Press the STOP Button twice.
* Press the FUNCTION Button.
* Press the OPEN/CLOSE Button to open the CD tray.
* Press the POWER Button to turn off your radio.
To repeat a track or an entire CD:
1. Press the POWER Button to turn on your radio.
2. Press the FUNCTION Button one or more times until CD track appears on
the display.
3. Press the OPEN/CLOSE area to open the CD door.
4. Place a CD with the label side up in the center spindle, then press the
OPEN/CLOSE area to close the door.
5. Press the PLAY/PAUSE Button to start playback.
6. Press the REPEAT/M– once, "REP" will appear on display.The selected
track will play and repeat until you press the STOP button control.
7. Press the REPEAT/M– twice, "REP ALL" will appear on the display.
All tracks of the disc will be repeated. To stop the disc play, press the STOP
button control.
To shuffle playback
During CD on iPod playing, press the shuffle button select to shuffle/random
playback and press again to cancel.
Note: This operation also applies to CD program playback.
Notes: This operation also applies to CD program playback.