Operating instructions – Curtis IP1490 User Manual

Page 18

Advertising
background image

OPERATING INSTRUCTIONS

17

To clean the lens

* If the lens get dirty, your player may skip or may not play a CD

1.

Open the CD door.

2.

Use a camera lens blower/brush to blow on the lens once or twice, brush

the dust or particles off the lens, then blow again.

3.

To remove fingerprints, use a dry cotton swab to wipe from the middle to

outer edge of the lens.

This unit is designed to play only discs bearing the identification
logo as shown here. Other discs may not conform to the CD
standard and may not play properly.
Discs should be stored in their cases after each use to avoid damage.
Do not expose discs to direct sunlight, high humidity, high temperatures, ordust,
etc. Prolonged exposure or extreme temperatures can warp the disc.
Do not stick or write anything on either side of the disc. Sharp writing
instruments or the ink may damage the surface.


To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.

Cleaning the Unit

Advertising
This manual is related to the following products: